| Colorfastness to laundering | Color change and staining of adjacent fabrics during washing | ISO 105-C06; AATCC TM61 is also commonly specified | Gray-scale ratings for color change and staining, usually 1–5, with higher ratings indicating better performance | Confirm the exact test option, temperature, detergent, and number of cycles. Compare results with the product specification. |
| Colorfastness to rubbing (crocking) | Color transfer from the fabric under dry and wet rubbing | ISO 105-X12; AATCC TM8 is also commonly specified | Gray-scale staining ratings for dry and wet rubbing, commonly on a 1–5 scale | Review wet and dry results separately. Surface finishes, pile, and dark shades can affect transfer. |
| Colorfastness to perspiration | Color change and staining after exposure to acidic and alkaline perspiration solutions | ISO 105-E04 | Separate gray-scale ratings for color change and staining after the specified exposure | Check both solution conditions and staining on each adjacent-fabric component included in the test. |
| Colorfastness to light | Fading caused by exposure to controlled artificial light | ISO 105-B02; AATCC TM16.3 is also commonly specified | Lightfastness rating, often assessed against blue wool references on a 1–8 scale | Confirm the exposure procedure and endpoint. A rating scale and result should be interpreted using the specified method. |
| Dimensional change after domestic laundering | Shrinkage or growth in length and width after washing and drying | ISO 5077 with a laundering procedure from ISO 6330 | Percentage dimensional change in length and width; negative values generally indicate shrinkage and positive values indicate growth | Specify wash cycles, temperature, machine type, and drying method. Compare each direction with the buyer’s tolerance. |
| Dimensional change after dry cleaning | Fabric shrinkage or growth through a specified dry-cleaning and finishing process | ISO 3175-2, with specimen preparation and measurement as applicable under ISO 3759 and ISO 5077 | Percentage dimensional change in the measured directions after the specified process | Ensure the process and finishing conditions reflect the garment-care requirement and the agreed test protocol. |
| Dimensional change after steaming | Fabric dimensional response to a controlled steaming treatment | ISO 3005 | Percentage dimensional change following the specified steam exposure | Useful when steaming is relevant to garment finishing or care. Check the specified steam conditions and measure both fabric directions. |