| Selective Pallet Racking | Many SKUs with a small or moderate number of pallets per SKU; mixed product sizes. | Low to moderate. Aisles are needed for forklift access to each storage position. | Direct access to every pallet; supports FIFO or LIFO depending on inventory procedures. | Works with standard forklifts, subject to aisle width, lift height, and load requirements. | Warehouses prioritizing easy access, frequent picking, and flexible SKU changes. | Uses more aisle space than high-density systems. |
| Double-Deep Racking | Fewer SKUs with multiple pallets per SKU and reasonably consistent pallet dimensions. | Moderate to high. Two pallet positions are stored deep on each side of an aisle. | Front pallets must be moved to reach rear pallets; rear positions have reduced selectivity. | Usually requires a deep-reach truck and compatible aisle layout. | Operations seeking more pallet positions while retaining access to multiple product lines. | Requires specialized equipment and can complicate access to rear pallets. |
| Drive-In / Drive-Through Racking | Large batches of the same SKU, with few product lines and stable pallet dimensions. | High. Forklifts enter storage lanes, reducing the number of access aisles. | Drive-in commonly operates LIFO; drive-through can support FIFO when loading and unloading occur at opposite ends. | Operators drive into lanes; pallet and rack clearances require careful control. | Bulk storage of seasonal goods or uniform products with limited SKU variety. | Lower selectivity and greater care needed to avoid rack or pallet impacts. |
| Pallet Flow Racking | High-volume pallet quantities per SKU with regular replenishment and dispatch. | High. Pallets move through inclined lanes, reducing forklift travel into the storage area. | Typically FIFO: pallets are loaded at one end and retrieved at the other. | Requires flow lanes, compatible pallets, and controlled loading and replenishment practices. | Fast-moving products where stock rotation and predictable replenishment are important. | Higher system complexity; lane performance depends on pallet condition and product consistency. |
| Push-Back Racking | Several pallets per SKU, often arranged in short lanes for batch storage. | High. Multiple pallets are stored deep from the aisle on nested carts or rollers. | Generally LIFO: the most recently loaded pallet is retrieved first. | Forklift loading pushes existing pallets farther into the lane; operators need lane-specific procedures. | Products stored in batches when greater density is needed than selective racking provides. | Not suitable when strict FIFO rotation or direct access to each pallet is required. |
| Carton Flow Racking | Fast-moving cases or totes picked individually from cartons. | Moderate to high for forward-pick areas, depending on lane depth and replenishment space. | Usually FIFO within a lane as cartons move from the replenishment side to the picking face. | Needs orderly replenishment and cartons or totes that move reliably on the flow track. | Order-picking zones with frequent case-level picks and replenishment from reserve storage. | Lane capacity and product fit must be planned around carton dimensions and demand. |
| Cantilever Racking | Long, bulky, or irregular items such as pipe, timber, and metal sections. | Moderate. Open fronts allow long items to be stored without front columns. | Direct access to stored loads; stock rotation depends on the loading and picking process. | Requires suitable material-handling equipment and properly supported, balanced loads. | Storage of products that do not fit safely or efficiently on standard pallet beams. | Load dimensions, arm configuration, and floor layout can limit capacity and flexibility. |