| Vehicle-specific replacement filter | Uses the filter media and pickup design specified for the transmission. | Routine servicing when the original pan and transmission configuration are retained. | Helps keep wear particles and other debris from circulating through the hydraulic system. | Match the filter to the exact transmission; check the seal or grommet and install it as directed. |
| Deep-pan-compatible filter | Uses a pickup tube or filter body designed to work with a deeper-than-standard pan. | Transmissions fitted with a deeper replacement pan. | Maintains the correct fluid pickup position, helping reduce the risk of fluid starvation. | Use a filter designed for the pan depth. A standard-height filter may not reach the fluid correctly. |
| Felt or fiber-media filter | Fluid passes through porous media that captures fine contaminants; construction varies by application. | Transmissions designed for a media-style internal filter. | Can capture finer debris than a coarse screen, helping limit contamination in hydraulic passages. | Usually replaced rather than cleaned. Follow the transmission maker’s service instructions. |
| Metal-mesh screen filter | A woven or formed screen blocks larger particles while allowing fluid to pass through. | Applications designed to use a screen-type filter. | Helps stop larger debris from reaching the pump and hydraulic circuits. | Some screens can be cleaned, but cleanability depends on the design. Replace damaged or restricted screens. |
| External spin-on filter | A sealed, replaceable canister contains filter media and attaches to a dedicated mounting point. | Transmissions designed or equipped for an external spin-on filter. | Provides a convenient service point for capturing circulating contaminants. | Not a universal fit. Confirm the specified filter, flow direction, and replacement interval. |
| In-line cooler-circuit filter | An external unit filters fluid in a transmission cooler line; some designs include a bypass valve. | Approved cooler-line installations or applications where an external filter is specified. | Can capture debris in the cooler circuit before fluid returns to the transmission. | Install only in the specified line and direction. Check flow capacity and bypass requirements to avoid restricting circulation. |
| Magnetic-assisted filter or pan setup | A magnet collects ferrous particles; the transmission filter separately traps debris according to its media design. | Servicing a compatible pan or filter arrangement where a magnet is specified or suitable. | Can retain some iron-based wear particles that a magnet can attract. | A magnet is not a substitute for the filter and will not capture non-ferrous debris. Inspect and clean it during service if the design allows. |
| Selection note: The correct filter depends on the exact transmission, pan configuration, and manufacturer’s service specification. Filtration efficiency, media, and replacement intervals vary by application; use published specifications rather than assuming a universal micron rating. |