| 1. Define the data product first | Orthomosaic, thermal inspection map, multispectral vegetation index, or 3D point cloud | Payload needs vary by sensor; a basic mapping camera may be under 1 kg, while a LiDAR package can be several kilograms. | Specify required ground resolution, coverage, accuracy, and deliverable format. These determine the sensor and flight plan more reliably than choosing an aircraft by payload rating alone. |
| 2. Match payload mass to the complete installed load | RGB mapping camera with lens, mount, cables, and any positioning equipment | About 0.2–0.7 kg for a typical compact mapping-camera package | Ask whether the stated payload limit includes the mount and accessories. Keep the complete installed mass within the aircraft’s approved limit, with margin for configuration changes. |
| 3. Include payload power, not just payload weight | Multispectral camera and associated positioning or illumination components | About 0.3–0.9 kg and roughly 10–30 W for an illustrative package | Confirm available voltage, continuous power, connector type, and whether payload power is included in endurance claims. Check that the aircraft can supply the load throughout the mission. |
| 4. Size for thermal sensor operating mode | Thermal camera used for still-image inspection or video monitoring | About 0.2–0.8 kg and roughly 5–20 W; data may range from about 1–20 GB per hour depending on capture mode and settings. | Confirm resolution, frame rate, recording format, and whether video or stills are required. Continuous video can create substantially more data than periodic image capture. |
| 5. Allow for heavier sensors and higher data volumes | LiDAR mapping package with scanner, positioning unit, and mount | About 1–3 kg and roughly 20–80 W; a mission may generate around 10–100 GB per hour, depending on the system and settings. | Verify total package mass, power draw, interface compatibility, and storage workflow. Check that the aircraft’s payload rating and center-of-gravity limits support the complete installation. |
| 6. Recalculate useful endurance with the real payload | Any sensor configuration, especially a heavier camera or LiDAR package | Use the aircraft maker’s payload-versus-endurance data for the intended configuration; empty-aircraft endurance is not a suitable mission estimate. | Account for payload mass, power draw, temperature, wind, altitude, and the VTOL takeoff and landing reserve. Plan the survey area around realistic usable flight time. |
| 7. Check storage and offload capacity before deployment | High-resolution RGB, multispectral, thermal video, or LiDAR data collection | Required storage depends on image count, resolution, frame rate, compression, and mission duration; estimate total data per sortie before selecting storage. | Confirm onboard storage, removable-media support, file-transfer time, backup procedure, and compatibility with processing software. Leave capacity for reserve and repeat flights. |